Products

home
/
Products
/
CSK LINEAR GUIDE
/
LMG-TC Series

LMG-TC Series

Features

The LMG series linear guide bearing adopts four rows of steel balls and a 45-degree arc-shaped contact angle to bear the load. It is equipped with high-load and high-load performance. The linear motion guide rails manufacture of CSK adopts the characteristics of the adjustment center can absorb the assembly tray on the installation surface during equipment, which fully realizes the high precision, high reliability, and smooth and stable straight line of precision equipment.

The compact design of the LMG-TC series linear guide is easy to install, and the height and space can be used more effectively. The load capacity is consistent with the standard flange type linear guide.

Note: Use Google Chrome for downloading.

Specification

單位／Unit：ｍｍ

型號	Dimensions of Assembly			Dimensions of Block													Dimensions of Rail					Basic Load Rating		Static Moment Rating					Weight
	Height	Width	Length	B	C	安裝孔 Sx𝓁	L1	T	T1	H1	N	e1	e2	e3	G	Grease Nipple	Width		Height	Pitch	Hole dimension	Dynamic	Static	M_{P_(KN．m)}		M_{Y_(KN．m)}		M_{R_KN．m}	Block Kg	Rail Kg/m
	M	W	L	B	C	安裝孔 Sx𝓁	L1	T	T1	H1	N	e1	e2	e3	G	Grease Nipple	W1	W2	M1	F	Dxhxd	C KN	C₀ KN	Single Block	Double Blocks	Single Block	Double Blocks	M_{R_KN．m}	Block Kg	Rail Kg/m
LMG15 TC	24	52	58.2	41	26	M5x7	39.5	5	7	4.5	5	3.3	4	8.6	5	M4x0.7	15	18.5	13	60	7.5x5.3x4.5*	11.8	18.9	0.13	0.76	0.13	0.76	0.15	0.20	1.29
LMG20 TC	28	59	75	49	32	M6x9	52.5	5	9	4.6	6.5	4.5	7	10.8	12	M6x0.75	20	19.5	15	60	9.5x8.5x6	20	32	0.30	1.68	0.30	1.68	0.33	0.36	1.92
LMG25 TC	33	73	83.8	60	35	M8X10	58.8	6	10	6	7	5	9.5	11.8	12	M6x0.75	23	25	18	60	11x9x7	27.9	42.5	0.44	2.47	0.44	2.47	0.51	0.58	2.67
LMG30 TC	42	90	98	72	40	M10x15	69.8	12	15.2	8	8	6	8	14	12	M6x0.75	28	31	23	80	14x12x9*	38.8	57.8	0.70	3.88	0.70	3.88	0.83	1.10	4.48
LMG35 TC	48	100	111.2	82	50	M10x15	80.2	10	15.3	9.5	8	7.5	8	15.6	12	M6x0.75	34	33	26	80	14x12x9	51.7	75.5	1.04	5.72	1.04	5.72	1.31	1.50	6.24

*The standard countersink of LMG15 rail is（7.5×5.3×4.5）and with M4 screw. If with M3 screw, the ordering code should add"U", and the countersink is 6×4.5×3.5.The ordering code is LMG15U.
The standard countersink of LMG30 rail is（14×12×9）and with M8 screw. The ordering code is LMG30R. If with M6 screw, the ordering code is LMG30U , and the countersink is 11×9×7.